15 - Edit Mode
Okay this is where it doesn’t get complicated. Edit mode simply changes encoders 4-8 to their alter
-
nate function as indicated below the encoder. When in Edit mode, the Edit mode LED will either be
GREEN
if you are editing EFFECTS, or RED if you are editing
STOMPBOxES
. To enter Edit mode
simply press either the Stompbox encoder (1) or the Effects encoder (3). To exit Edit mode simply
press the same encoder again.
Any time you want access to the Delay or Reverb you will need to enter Edit mode!
16 - Headphone/Record Out
We really spent a lot of time making sure the headphone jack was studio quality, and because of that
with the proper adapters (not supplied) you can use this output for recording. NOTE: SPEAKER IS
MUTED WHEN HEADPHONES ARE IN USE! Master Volume (10) controls headphone level.
17 - USB Record Out
Not available on the VYPYR 15 or 30
The VYPYR USB Record out requires no drivers. Just plug a standard USB cable into your computer
and it will detect your VYPYR as an audio device. Open your favorite recording program and start
recording. Don’t worry, the output is microphone/cabinet simulated and will sound great
right into your
computer. NOTE: Speaker is intentionally muted when USB output is in use although the headphone
output is active for real time monitoring.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
0
Summary of Contents for VYPYR 100
Page 1: ...Player s Handbook for VYPYR 15 30 75 100 60 Tube 120 Tube ...
Page 20: ......
Page 38: ......
Page 56: ......
