Peavey VYPYR 100, Player'S Handbook

Page: 34 / 76

Restore Factory Default Settings
To restore your amplifier to factory default settings (THIS PROCESS WILL ERASE ANY PRESETS
YOU MAY HAVE STORED) turn the amplifier off, press and hold preset buttons 1 and 2 simultaneously
and turn the amp back on. After a moment the LEDs will return indicating the amplifier has been reset.
STOMP P1 P2 Notes
xR Wild Level Drive
Tone knob set to 12
o’clock
, 12dB more gain than pedal
x Boost Level Drive
Fuzz Level Drive
Russian model, tone at
o’clock
, 10dB more gain potential
BC Chorus Speed Depth
Filters set to 12
o’clock
, flat
Squeeze Level Sensitivity
Ring Modulator Freq Mix
Modulation frequency from 80 hz to 2Khz
Auto Wah Speed Depth
At min Depth, Param1 serves as fixed
Analog Flange Speed Depth
Depth combines Width and Regen of original pedal
MOG Octave Up Octave Down
Level controls
Analog Phase Speed Depth
Depth adds regeneration for more intensity
TubeScrm Level Drive
Tone knob at 12
o’clock
, 12dB more gain than pedal at max
EFFECT P1 P2 Notes
Octaver Mix Octave
Phaser Speed Depth
8 stage phaser
Rotary Spkr Speed Depth
Reverse Time Mix
Max Mix = 0/100 Dry/Wet, 250ms<T<1s
Pitch Shifter Interval Mix
At Minimum Mix, Param1 controls Detune
Flanger Speed Depth
DelayLine=7ms
Slap Back Time Mix
Max Mix = 50/50 Dry/Wet, 50ms<T<167ms
Env Filter Sensitivity Intensity (Q)
Chorus Speed Depth
DelayLine=15ms
Tremolo Speed Depth
Period from 2 s to .2 s
Engineer`s Notes