4
E N G L I S H
E N G L I S H
INPUT PAD SWITCH (1)
Provided for instruments that have extremely high output, which can result in overdriving (distorting) the input
gain stage. Depressing the switch to its "in" position reduces the level of the input signal by 10 dB.
INPUT (2)
This input will accept signals from all types of bass pickups.
PRE GAIN (3)
Controls the input gain of the tube channel.
CHANNEL STATUS LED (4)
Illuminates when channel is activated.
POST GAIN (5)
Controls the overall volume level of the channel. The master volume adjustment should be made after the desired
sound has been achieved.
PRE GAIN (6)
Controls the input gain of the solid-state channel.
CHANNEL STATUS LED (7)
Illuminates when channel is activated.
INPUT CLIP INDICATOR (8)
This LED indicates (when lit) that the input gain stage is being overdriven (distorted). Depressing the input pad
switch to its "in" position or reducing the pre gain will alleviate this problem.
CHANNEL SELECT SWITCH (9)
Allows selection of the tube or solid-state channel. The "in" position of the switch selects the solid-state channel,
and the "out" position selects the tube channel.
NOTE: Channel selection may also be accomplished by the remote footswitch. If the remote selection is desired,
the select switch must be in the "out" (tube) position.
CHANNEL COMBINE SWITCH (10)
Allows selection of single channel or combined channel operation. The "in" position of the switch selects com-
bined channel operation where both channels operate simultaneously. The "out" position selects single channel
operation.
HIGH (11)
An active tone control (shelving type,
±
15 dB) that varies the high frequency boost or cut.
2
1
4
3
5
6
7
8
10
9
11
12
13
14
16
19
15
17
18
