– 20 –
PROBLEM
POSSIBLE CAUSE
SOLUTION
- Wrong type of saw blade.
- Shaft of motor causes wobbling.
- Overheating.
- Saw blade type is unsuitable for the
material being cut.
- Saw blade ype is unsuitable for the
machine performance.
- Saw blade too hard.
- Diamond segments are blunt.
- Poor tension in the blade material.
- Too much load placed on the saw
blade.
- Diamond segments are blunt.
- The saw blade has slipped on the
motor shaft when running.
- Saw blade overheating due to a lack of
cooling water.
- Lateral friction when cutting.
- Material is not being fed parallel to the
saw blade
- Poor tension in the blade material.
- Too much load on the saw blade.
- Use harder saw blades.
- Have bearings of the motor or the motor
replaced.
- Ensure optimum flow of cooling water.
- Use appropriate type of saw blade.
- Sharpen the diamond saw blade.
- Return the saw blade to the manufacturer.
- Use a suitable saw blade.
- Sharpen the saw blade.
- The arbor of the saw blade must be fitted
with an appropriate adator ring.
- Check the receiving flange and have it
replaced if necessary.
- Ensure an optimum flow of cooling water.
- The material feed is too high; proceed
more slowly.
- Ensure that the direction of feed is
absolutely parallel to the saw blade.
- Adjust the roller table or have it adjusted.
- Have the saw blade tensioned.
- The material feed is too high, proceed
more slowly.
EXCESSIVE WEAR
SAW BLADE IS BLUNT
APPEARANCE OF CUT IS
NOT OPTIMAL
THE CENTER HOLE IN THE SAW
BLADE HAS BECOME WIDER DUE TO
WEAR
SAW BLADE SHOWS BLOOMING
COLORS
GRINDING MARKS ON THE
SAW BLADE
xxii. HOW TO ORDER PARTS
Please have the following information ready before calling:
Model Number of the Tile Saw
and
Part Description
For warranty purpose, please have the following ready:
Serial Number
and
When purchased and where
All parts listed may be ordered from your Local warehouses. If the part is not stocked locally, call our Corporate office and ask for
our Customer Service Department. For Technical Support call
1-800-969-5561
. In Canada, call
1-800-387-0008
. There is a $25.00
minimum order.
Return Policy: Return goods for credit or exchange on the basis of the following terms:
(1)
They must be current products;
(2)
Items returned for replacement or refund should be in original cartons and must be accompanied by a packing slip with the
following information: Returned Goods Authorization (RGA) number obtainable from Customer Service Department • List of items
returned • Reason(s) for return(s) • Copy of original invoice(s);
(3)
Freight charges must be assumed by sender;
(4)
Returning goods
are subject to a 15% handling charge to cover our cost of repacking and restocking. All Prices are subject to change without notice.
Disclaimer: Pearl Abrasive Co. reserves the right to make changes or improvements on its products without incurring an additional
obligation including any obligation to make corresponding changes or improvements to products previously manufactured or sold.
Pearl reserves the right to discontinue products at any time without notice.
All illustrations displayed in this manual are the property of Pearl Abrasive Co. and shall not be duplicated or reproduced without the
express written consent of Pearl Abrasive Co.
xxiii. CUSTOMER SERVICE
AFTER SALE SERVICE
All customer service (technical questions, re-order of parts, etc.) will be provided by our company. All spare parts for after sales
service will be stocked and shipped from our warehouse. If requested, we may arrange for our sales representatives to hold a training
class for product knowledge at dealer’s location.
Summary of Contents for VX RSPRO R
Page 27: ...27 NOTES...
