– 13 –
TEMPERATURE CHANGES
AMBIENT TEMPERATURE
BELOW 37°F (WINTER)
•
To prevent the water in the pump and cooling system
from freezing, remove the water after using the
machine or when there will be a long break. Make
sure that the cooling system is entirely drained so
that there is no water left inside the pump, the
bearing house and water hose.
When the machine has not been used for a long period of
time, hard packed dirt may begin to build up inside the
pump and block the pump wheel. If the machine is
activated with the immersion pump blocked, the electric
motor of the pump will be damaged within a few minutes.
Please follow the steps listed below to clean the pump
before operating the saw.
1.
Unscrew the pump filter.
2.
Remove the immersion pump from the water
container.
3.
Clean the immersion pump.
4.
Loosen the fixing screws of the pump lid.
5.
Take the lid off the pump (be careful not to damage
the gasket located inside with a sharp object)
6.
Clean the pump lid.
7.
Remove all dirt and incrustations from the pump
wheel.
8.
Check whether the pump wheel can be easily turned.
9.
Then reassemble the immersion pump correctly and
check whether it works properly.
xxi. WATER PUMP
MAINTENANCE
xxii. ACCESSORIES
Part Name
Angle Guide
Part Number
V370060
Quantity
1
Part Name
Table Extension
Part Number
V370014
Quantity
1
Summary of Contents for VXRS RAIL SAW
Page 19: ... 19 ...
