Peaq PBR210HC, User Manual

Page: 49 / 126

ENGLISH 48
Main menu
TV Type Correct
Resolution Setting
If your TV is a standard-definition PAL
TV (American, Asian SD TV)
480i/576i
If your TV is an enhanced-definition TV (EDTV) 480p/576p
If your TV is a high-definition TV (HDTV) capable of 720p only 720p
If your TV is a high-definition TV (HDTV) capable of 1080i only 1080i
If your TV is HDMI equipped, and if your TV is a high-
definition TV (HDTV) capable of 1080p [any frame
rate], and you are connected to your TV via HDMI
1080p (HDMI)
If your TV is HDMI equipped, and you are connected
to your TV via HDMI, and you wish the BD player to
set the output based on information exchanged be-
tween the TV and the player over the HDMI cable
HDMI auto
IMPORTANT: The menu functions are
only available if AV SOURCE is selected as
source. Appliance and connected TV or pro-
jector must be activated; the image signal of
the appliance must appear on the screen.
Press
MAIN MENU
to open the main menu.
Navigate as described in general navigation.
DISPLAY SETUP
HDMI Status:
To show if the HDMI is con-
nected or not.
HDMI preferred Format: To show HDMI
best format of TV Set.
TV Type: This player supports different TV
outputs, including NTSC and PAL systems.
NOTE: If playing the disc of the PAL type,
please select PAL option. If playing the disc
of the NTSC type, please select NTSC op-
tion.
Resolution:
To select the resolution output
of the player to match your TV. To find the
correct setting, please use the table below.
NOTE: Setting the player for an output reso-
lution not supported by your TV will result in
unpredictable results. Only the HDMI output
of the player is capable of supporting 1080p
video output at any frame rate. If the HDMI
cable is not connected, the component out-
puts are limited to 1080i.