Peaq PBR210HC, User Manual

Page: 52 / 126

ENGLISH 51
5 [PG-R] Parental guidance recommend-
ed.
6 [R] Not suitable for anyone under
17 unless supervised by a par-
ent or adult guardian.
7 [NC-17] Not suitable for anyone under
17.
8 [Adult] Adults only.
Parental Password:
To change password,
input old password first, then enter new
password of 4 digits twice.
IMPORTANT: (Initial password 0000)
SYSTEM SETUP
Optical Disc AutoPlay: There are two op-
tions for Optical Disc AutoPlay.
Disable: Media Launcher must be used to
select optical discs.
Enable: Optical discs playback automatically
without use of Media Launcher.
Screen Saver Duration:
To set the time of
entering screen saver status. If the screen
saver duration is off, the screen saver func-
tion is off.
Update Via Network: Download and install
product updates for your player.
Restore Factory Defaults:
To reset the
player to the default factory settings.
NOTE:
This does reset the Parental Control
Password.
System Information: Select System Infor-
mation, then press
ENTER
. The System
Information screen opens, showing the rel-
evant software version information.
NETWORK SETUP
Link Status:
The link status menu items
show if the current network is connected or
not.
MAC address:
The hardware address of the
Ethernet interface is displayed.
IP Mode: The IP Mode option provides three
configuration modes for IP.
Dynamic: Enables DHCP. Recommeded
method for automatic network setup con-
figuration.
Manual: Requires user to configure network
settings such as IP address, subnet mask,
gateway, etc.
Off: Disables network interface.