3.1.3. User Interface
The figures below are the interfaces in Timer mode; you can consult the following instructions for the interfaces in Normal
status too.
Normal - Mode
Figure 3-9 User interface in Independent mode
①
Output status of Cannel 1
②
Specified time and left time of current output when the timing output of Channel 1 is on
③
Actual output value of power for Channel 1
④
Timing output mode of Channel 1 (Sequence / Loop)
⑤
Timer range of Channel 1
⑥
The parameter number of the current output when the timing output of Channel 1 is on.
⑦
Set values of voltage and current for Channel 1
⑧
Actual output values of voltage and current for Channel 1
⑨
Status and set values of O.V.P and O.C.P for Channel 1 in current status
⑩
Status icons, see "Status Icons" for more details
-33-