4.5.2. Recall and Delete System Parameters File
(1) Press the Recall key to enter the function interface (press it again to exit). Press the
▲ / ▼ key to choose the
storage location. Press the
key to show the list of system parameters files.
(2) The list displays the file name and stored date. Turn the knob or press the
▲ / ▼ key to select a file, and then
press the
key.
(3) Two options appear on the screen: "Load" and "Delete". Turn the knob or press the
＜
/
＞
key to switch between
the options. Press the
key to confirm.
4.5.3. Record the Output
You have to insert a USB disk before using this function. By pressing the Record key, the current data of the channel can
be recorded into a txt file, which is stored on USB disk.
(1) Press the Record key; press the numeric keys to set the interval.
(2) Press the
key to start recording. During recording, an icon
is shown on the status bar.
(3) Press the Record key again to stop recording.
4.6. System Settings
You can set the system by operating the System Menu. It is suggested that you should read the "3.5. System Menu
Operation" first, so as to be familiar with the menu operation.
4.6.1. Set Language
Press the System
key and enter [System →Language]; choose the desired language. The supported languages include:
Chinese, English and so on.
4.6.2. Set Bright
Press the System
key and enter [System →Display →Bright]. Press the
＜
/
＞
key or turn the knob to adjust the screen
brightness (1~10).
4.6.3. Set Screen Saver Time
The screen saver will run automatically if no operation is taken for any key within the set time. Press any key to resume.
Press the System
key and enter [System →Display →ScrSaver]. Press the
＜
/
＞
key or turn the knob to adjust the
screen saver time (1~99 minutes). When it is set to "00", the screen saver is disabled.
-48-
