Peak Peak 632A, User Manual

Page: 55 / 137

PEAK 632A User Guide
BIOS Setup
4-
25
H. Doze
(*) Remark 1
1. Disable System will never enter STANDBY
mode
2. 1 Min
2 Min
4 Min
6 Min
8 Min
10 Min
20 Min
30 Min
40 Min
1 Hr
Defines the continuous idle time
before the system entering STANDBY
mode.
if any item defined in (J) is enabled &
active, STANDBY timer will be
reloaded
Note: Normally,STANDBY
mode puts the system
into low speed or 8
MHz, screen may be
off depend on (E)
I. Suspend Mode
(*) Remark 1
1. Disable System will never enter SUSPEND
mode
2. 1 Min
2 Min
4 Min
6 Min
8 Min
10 Min
20 Min
30 Min
40 Min
1 Hr
Defines the continuous idle time
before the system entering SUSPEND
mode.
if any item defined in (J) is enabled &
active, SUSPEND timer will be
reloaded
Note: Normally,SUSPEND
mode puts the system
into low speed or 8
MHz, clock is
stopped, screen may
be off depend on (E)
J. HDD Off 1. Disable HDD motor will not off
After: 2.10 Sec
1 Min
10 Min
30 Min
1 Hour
2 Hour
4 Hour
Defines the continuous HDD idle time
before the HDD entering power saving
mode (motor off)