Peak Peak 632A, User Manual

Page: 38 / 137

PEAK 632A User Guide
BIOS Setup
4-
8
Time
The time format is <hour> <minute> <second>. which accepts both function key or
numerical key The time is calculated based on the 24-hour military-time clock. For
example, 1 p.m. is 13:00:00.
Primary Master/Primary Slave
The categories identify the types of drives that have been installed in the computer. There
are 45 predefined types and 2 user definable types are for Enhanced IDE BIOS. Type 1 to
Type 45 are predefined. Type User is user-definable.
Press PgUp/<+> or PgDn/<
−
> to select a numbered hard disk type or type the number and
press <Enter>. Note that the specifications of your drive must match with the drive table.
The hard disk will not work properly if you enter improper information for this category.
If your hard disk drive type is not matched or listed, you can use Type User to define your
own drive type manually.
If you select Type User, related information is asked to be entered to the following items.
Enter the information directly from the keyboard and press <Enter>. This information
should be provided in the documentation from your hard disk vendor or the system
manufacturer.
If the controller of HDD interface is ESDI, the selection shall be ype 1
If the controller of HDD interface is SCSI, the selection shall be one
If the controller of HDD interface is CD-ROM, the selection shall be one
CYLS. number of cylinders
HEADS number of heads
PRECOMP write precom
LANDZONE landing zone
SECTORS number of sectors
MODE HDD access mode
If a hard disk has not been installed select NONE and press <Enter>.