manualshive.com logo in svg

Peak Peak 632A, User Manual

Share
Download
Peak Peak 632A User Manual Download Page 2

Copyright 2000

All rights reserved

Edition 1.0 July, 2000

The information in this document is subject to change without prior notice in order to improve
reliability, design and function. The information in this document does not represent
commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use of the PEAK 632A, nor for any infringements upon
the rights of third parties which may result from such use.

This document contains proprietary information protected by copyright. All rights are reserved.
No part of this manual may be reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.

Trademarks
PEAK 632A is a registered trademark of NEXCOM International Co., Ltd.

IBM PC is a registered trademark of International Business Machines Corporation.

Intel and Pentium are registered trademarks of Intel Corporation. Award is a registered
trademark of Award Software, Inc.

Other product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.

Summary of Contents for Peak 632A










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands