Peak Peak 632A, User Manual

Page: 5 / 137

How to use this manual
This manual is written to help you use the PCA-6551VE. It describes how to make various
settings on the Pentium
®
CPU board to meet your requirements. A brief summary of the manual
follows:
Chapter 1 “Introduction gives an overview of the product specifications. It also tells you
what is included in the product package.
Chapter 2 umpers and Connectors describes the definitions and positions of jumpers and
connectors that you may easily configure and set up according to your particular requirements.
Chapter 3 ystem Expansion describes how to change or expand the CPU board by changing
the system memory, cache memory, and/or CPU. These changes will yield more power from the
CPU board.
Chapter 4 ward BIOS Setup describes how to use the advanced PCI/Green BIOS to control
almost every feature of the PCA-6551VE, including the watchdog timer.
Chapter 5 “VGA Driver Installation Procedures” gives instructions for installing and operating
the software drivers on the utility disk included in your package.
Chapter 6 “LAN Driver Installation Procedures” provides detailed information on Ethernet
configuration, and shows how to change the configuration to match your application
requirements.
Chapter 7 “SCSI Driver Installation Procedures” provides detailed information for installing
and operating the software drivers, and shows how to change the configuration to match your
application requirements.
Appendix A “Watchdog Timer” describes how to set up the watchdog timer (WDT), and gives
an example of programming the WDT.
Appendix B “Memory Mapping” describes usage of the 1st MB memory.