Page 13
Fittings Kit Contents
Supplied in the Fittings Kit are all the fittings required to connect the generator to the
application. The contents of the Fittings Kit are as follows:
1. Teflon
Tubing
x
3m
2. ¼”
Compression
Fitting
x
1
3.
1
⁄
8
” Compression Fitting
x
1
4. UK
Mains
Power
Cable
x
1
5. EU
Mains
Power
Cable
x
1
6. US Mains Power Cable 110v
x 1
7. US Mains Power Cable 230v
x 1
All of the generators output ports are located on the output panel at the rear of the
unit.
Unpacking Instructions
The unit weight constitutes a two person lift and as such, safe lifting practices should
be employed; do not attempt to lift on your own, as you will significantly increase the
chance of injury & damage to yourself and others around you.
1. Remove the screws encircled in red around the bottom of the crate lid and lift
upwards.
2. Next, with someone on either side of the unit, position your hands underneath the
unit ready to lift.
3. Ensuring your knees are bent and your back is straight, lift the unit to the desired
location.
