Peachtree Audio deepblue3, Owner'S Manual

Page: 9 / 12

Specifications:
• Acoustic Design:
(2) 1-inch high frequency drivers
(2) 3-inch midrange frequency drivers
(1) 6.5-inch low frequency driver
Acoustically sealed cabinet
• Power Amplifier: 440 Watts
• Inputs:
Bluetooth wireless with up to 5 connected devices
Optical Digital Audio (Toslink)
Line-level Analog Audio (3.5mm)
• Dimensions (H x W x D): 9.1 x 14.2 x 6.5 (inches) / 230 x 360x 164 (mm)
• Weight: 16 pounds / 7.3 kg
• AC Input: 100-240V 50/60Hz
TROUBLESHOOTING & SPECIFICATIONS
“I don’t hear anything playing.”
Make sure the deepblue
3
is plugged in and turned on (LEDs lit after buttons are touched).
Check that the correct input is selected; Bluetooth (Bluetooth LED blue), AUX (Input LED lit
blue) or OPT (Input LED lit white).
If the Bluetooth LED is flashing blue, the input is selected but a Bluetooth device is not
currently connected. Check the following next:
Make sure Bluetooth is enabled on your device.
Make sure your Bluetooth device is within ~33 feet of the deepblue
3
. Move closer or adjust the
position of the deepblue
3
to establish a connection.
Make sure music is playing on your device (not paused) and that the volume on the device
is not muted or set to a very low level. Many devices will pause playback if the Bluetooth
connection is lost.
If AUX is selected, make sure the wired connection is fully inserted on the connected device
and the deepblue
3
. If the connection is ok, check the volume level of the connected device (if
using a headphone output) to make sure it is not muted or set to a very low volume level.
If OPT is selected, make sure the wired connection is fully inserted on the connected device
and the deepblue
3
. If the connection is ok, check the volume level of the connected device (if
using a device with a built-in volume control) to make sure it is not muted or set to a very low
volume level.
Make sure the volume of the deepblue
3
is set to a comfortable listening level.