Peachtree Audio deepblue3 Owner'S Manual Download Page 5

Page: 5 / 12

B C D

AUX Analog Audio Input: Accepts line-level analog input from a tuner, cassette deck,

phono preamp or other type of line-level analog source.

Notes: Phono input requires the use of a phono preamplifier. When using the headphone

output of a connected device, that device’s volume control will affect the input level to

the deepblue

. The maximum output level of the deepblue

will be limited if the volume

control of the connected device is set to a relatively low level.

AC-IN: For connection to a compatible AC power source using the included power cord.

USB Port: For service use only. Note: Does NOT function as a USB digital audio input.

OPT Digital Audio Input: Accepts digital audio input from a Toslink optical digital audio

output up to 96kHz. Toslink digital audio outputs are common on most digital audio

sources including; disc players, cable boxes, Apple TVs, etc...

Contents of Packaging:

• deepblue

• AC power cord

• IR remote control with battery

• 3.5mm to RCA adapter cable to connect analog audio devices

• Optical cable to connect digital audio devices

• 3.5mm to 3.5mm cable to connect portable devices with a headphone output

CONTENTS & REAR PANEL CONNECTIONS

Summary of Contents for deepblue3












