Peachtree Audio deepblue3, Owner'S Manual

Page: 8 / 12

Pairing Your Device
Refer to your Bluetooth device’s owner’s manual for details on how to enter the device’s
Bluetooth pairing mode.
B
Push and hold the Bluetooth button on the top panelfor at least 4 seconds to enter
Bluetooth pairing mode. The Bluetooth LED will flash blue and white in this mode.
C
Turn on the Bluetooth feature on your device. Typically, Bluetooth controls are found
in the device settings menu. Enter the Bluetooth menu on your device and select
“deepblue
3
” to confirm the pairing.
D
Once paired with a device, the Bluetooth LED will light blue. A double-beep sound will
also indicate that the connection is estabilished.
Note: Pairing remains even when the unit or the Bluetooth device is powered off or
is taken out of range. The unit will attempt to connect with the last connected device
when that device is powered on and in range. Your Bluetooth device may pause music
playback when the Bluetooth connection is lost. You may need to press the play button
on the Bluetooth device to resume playback after the Bluetooth connection is restored.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature the deepblue
3
will be disconnected
from your device and the LED will flash blue. To reconnect, simply move back into range,
confirm Bluetooth is on and open the Bluetooth menu and, if necessary, tap on the
“deepblue
3
” to reestablish the connection.
Out of Range or Lost Signal
When the paired device is more than ~33 feet away from the deepblue
3
or there is something
blocking the Bluetooth signal (wall, floor, etc.). The LED will flash blue to indicate the
connection between the device and the deepblue
3
is lost. To reestablish a lost connection:
B
Move the connected device back into range (within ~33 feet), and make sure there’s
a clear line of sight and there are no obstructions between the deepblue
3
and the
Bluetooth device.
C
The connection will automatically be reestablished and the LED will turn light blue.
D
If the connection is lost, you may need to reconnect the device and the deepblue
3
again.
Please follow the “Reconnecting Your Device” instructions above.
AUX Analog Audio Input
Use the included 3.5mm to 3.5mm cable or 3.5mm to RCA cable to connect the line-level
analog audio output from a TV, set-top box or similar device.
Notes: Phono input requires the use of a phono preamplifier. When using the headphone
output of a connected device, that device’s volume control will affect the input level to
the deepblue3. The maximum output level of the deepblue
3
will be limited if the volume
control of the connected device is set to a relatively low level.
OPT Digital Audio Input
Use the included optical cable to connect the S/PDIF digital audio output from a media
player, CD player, TV, set-top box or similar device.
USEFUL TIPS AND MORE…