Peachtree Audio deepblue3, Owner'S Manual

Page: 7 / 12

^
B
On / Standby: Push and release to toggle
between power on and standby modes.
The current input LED will light for 10
seconds after the unit is toggled on.
C
VOL ^: Push and release to increase the
volume level by 1 step. Push and hold
for more than 1 second to continually
increase the volume level. The volume
level will continue increasing until
you release the button or achieve the
maximum volume level.
D
VOL : Push and release to decrease the
volume level by 1 step. Push and hold
for more than 1 second to continually
decrease the volume level. The volume
level will continue decreasing until
you release the button or achieve the
minimum volume level.
E
Mute Symbol: Push and release to toggle
volume level muting on and off. The five
LEDs flash white while audio is muted.
Notes: The blue LEDs indicate the volume
level for 10 seconds after a volume button
is released. Each LED represents 20% of
the volume level range.
F
BASS +: Push and release to increase the bass level by 1 step. Push and hold for
more than 1 second to continually increase the bass level. The bass level will continue
increasing until you release the button or achieve the maximum bass level.
G
BASS -: Push and release to decrease the bass level by 1 step. Push and hold for
more than 1 second to continually decrease the bass level. The bass level will continue
decreasing until you release the button or achieve the minimum bass level.
Notes: The first press of the BASS+ or BASS- buttons will display the current setting
via the white LEDs. Subsequent presses within 10 seconds will adjust the bass setting.
Each white LED represents ~20% of the bass range. The lowest bass setting (1) is
indicated by the left-most LED lit white @ 50%. The highest setting (10) is indicated by
all the LEDs lit white @ 100%.
H
AUX: Push and release to select the AUX input on the rear panel. The LED will light
blue for 10 seconds indicating the AUX input is selected. Note: When the unit is in
standby mode, this will also power the unit on.
I
OPT: Push and release to select the OPT input on the rear panel. The LED will light
white for 10 seconds indicating the OPT input is selected. Note: When the unit is in
standby mode, this will also power the unit on.
J
Bluetooth Symbol: Push and release to select the Bluetooth input. The LED will light
blue for 10 seconds indicating the input is selected. Note: deepblue
3
will pair with up to
5 Bluetooth devices. After they are paired, pressing and releasing the Bluetooth button
will switch between them.
REMOTE
VOL
VOL
BASS
+
BASS _
AUX OPT
1
2
5
6
4
3
8 7
9