PE micro Cyclone for ARM Developer'S Manual Download Page 8

Page: 8 / 61

Cyclone Automated Control Package

1.6 Versions

The Cyclone Automated Control Package product is split into three

separate versions. While this manual is written to support all three versions, it is
important to note the following limitations:

Basic Edition



DLL only supports controlling a single Cyclone unit



DLL will only execute the first image stored on a Cyclone (using the

START_execute_all_commands function call)



DLL does not support the “START_dynamic_program_bytes” function



DLL does not support the “compare_image_with_file” function



DLL does not support the “erase_all_cyclone_images” function



DLL does not support the “add_image_to_cyclone” function



DLL does not support the “update_image_with_file” function



RS232 / Ethernet communication protocols are not included

Professional Edition



DLL supports controlling of up to 3 Cyclone units simultaneously



DLL supports all available function calls



RS232/ Ethernet communication protocols are not included



Requires Compact Flash License (sold separately) to modify images on

external Compact Flash cards



Supports the modification of images on external SDHC cards on Cyclones

with this feature.

Enterprise Edition



DLL supports controlling of an unlimited number of Cyclone units

simultaneously



DLL supports all available function calls



RS232/ Ethernet communication protocols are included



DLL does NOT require Compact Flash License (sold separately) to modify

images on external Compact Flash cards. License is still required to
modify images on external Compact Flash cards when you use the
Cyclone Image Managerment utility GUI



Supports the modification of images on external SDHC cards on Cyclones

with this feature.

Summary of Contents for Cyclone for ARM





























































Search results

Summary of Contents for Cyclone for ARM

Reviews:

Related manuals for Cyclone for ARM

Brands by name

Popular brands

PE micro Cyclone for ARM, Developer'S Manual

Search results

Summary of Contents for Cyclone for ARM

Reviews:

Related manuals for Cyclone for ARM

Brands by name

Popular brands