PE micro Cyclone for ARM Developer'S Manual Download Page 41 | Manualshive

Page: 41 / 61

background image

Cyclone Automated Control Package

41

Execution related error codes

:

0x0001: Unable to detect target communication speed.
0x0002: Unable to enter debug mode.
0x0003: Operation cancelled by user.
0x0004: Error writing data byte block.
0x0005: Error writing data byte block.
0x0006: Error during execution.
0x0007: Error enabling module.
0x0008: Error enabling module.
0x0009: Error enabling module.
0x000A: Error testing target timing.
0x000B: Error reading data byte block.
0x000C: Error un-securing 9S12 target.
0x000D: Error un-securing 9S12 target.
0x000F: Stand alone operations for the Cyclone PRO are not configured.

0x1001: Blank_Check_Word Algorithm is not supported.
0x1002: Blank_Check_Byte Algorithm is not available.
0x1003: Error during blank checking device using blank_check_byte algorithm.
0x1004: Error during blank checking device using blank_check_word algorithm.

0x2003: Error during erasing device.
0x2004: Error during erasing device.

0x3001: Program_Word Algorithm is not supported.
0x3002: Program_Byte Algorithm is not available.
0x3003: Error during programming device.
0x3004: Error during programming device.
0x3005: Error during programming device.
0x3006: Error during programming device.

0x5003: Error during verifying module.
0x5004: Error during verifying range.

0x6003: Error during user functions.
0x6004: Error during user functions.

0x7003: Error calculating trim value.
0x7004: Trim value is not calculated.
0x7005: Program Word Algorithm is not supported for writing the trim value.
0x7006: Program Byte Algorithm is not available for writing the trim value.

«
...
39
40
41
42
43
...
»

Summary of Contents for Cyclone for ARM






























































Reviews:

No comments

Related manuals for Cyclone for ARM

Brand: Supermicro Pages: 2

Brand: MSI Pages: 112

Brand: SOYO Pages: 95

BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard

Brand: Intel Pages: 88

Brand: Intel Pages: 78

Brand: Gigabyte Pages: 40

Brand: Analog Devices Pages: 16

Brand: Gigabyte Pages: 44

Brand: Supero Pages: 89

Brand: Watersnake Pages: 20

Brand: MAX power Pages: 20

Brand: Gigabyte Pages: 40

Brand: SOYO Pages: 104

K9AG Neo2-Digital

Brand: MSI Pages: 103

Brand: California Instruments Pages: 85

Brand: Lattice Pages: 12

Brand: TOHATSU Pages: 102

Brand: TOHATSU Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands