PCS-P100 User Manual
15
www.pdk.co.kr
This function only can use in pressure measure mode.
Indicates opened and closed values when PCS sensed a change.
The pressure difference between the change-of-states (i.e. OPEN-
CLOSE or CLOSE-OPEN) value shows in Hysteresis.
1) Touch then select Switch Test
2) Touch to reset the values
1) Time : Set time
2) Cal. Pressure : Pressure Calibration
3) Cal. DMM : DMM Calibration (Manufacture management mode)
4) About PCS : Current PCS information
5) System Config : System Configuration (Manufacture management mode)
3.4 Switch Test
3.5 Setting
