PCS-P100 User Manual
2
www.pdk.co.kr
1. General Introduction
1.1 Introduction
PCS-P100 is Portable pressure calibrator for Pneumatic pressure calibration up to 10 MPa with
pressure generation and precise control. An independent pressure calibration system
combining electrical signal measuring and loop power to quickly and easily calibrate for a large
amount of on-site calibration.
Using Dual-Stage lever type hand pump to generate up to 10 MPa and quickly and easily, and
then use the built-in volume controller to precisely adjust the pressure with the secondary fine
pressure control.
PCS-P100 also has Pressure/vacuum switching valve to generate up to -97 kPa in vacuum
mode which has the best degree of a vacuum in its class.
Full-graphic touchscreen display with intuitive menu selection makes it high visibility and
operability.
Upper side of PCS-P100 can equipped quick connectors and adaptors for quick and easy to
connect UUT.
1.2 Features
1)
Dual-Stage lever type hand pump to generate and control up to 10 MPa
2) Dual-Stage lever type hand pump to generate and control up to –97 kPa for vacuum
3) 0.02% F.S Accuracy
4) Electrical connection for Transmitter
- Measure up to ±15 V, ±24 mA
- Source up to 24 VDC
- Loop Power
5) Pressure switch test, Help functions
6) Included carrying case
7) Available to apply pressure quick fittings (Optional)
