PDI-P10LCD USER MANUAL
Document Number PD196-058R3
PDI Communication Systems, Inc.
40 Greenwood Lane
Springboro, Ohio 45066
Phone 937-743-6010
Fax 937-743-5664
email: [email protected]
7
Installing TV on Suspension Arm
The PERSONA 10 is designed to mount on a wall mounted suspension arm
capable of supporting a television weighing 7 pounds. The single coaxial cable on
top of the unit is used to supply both low voltage AC or DC power (range 18 to 32
volts) and the RF signal to the television.
DANGER: ARM RECOIL HAZARD
The safety brake pin must
remain in the SAFETY BRAKE PIN HOLE whenever the television
set is removed from the arm or when the arm is removed from the
wall bracket to prevent the arm from springing open.
CAUTION
:
DO NOT
remove the
WHITE PLASTIC CAP
from the swivel assembly.
This swivel assembly is factory preassembled and adjusted. There is no need to
remove the cap.
IMPORTANT:
These instructions detail installing the PDI-P10LCD TV onto the PDI-508C-7
suspension arm. This arm is configured specifically for this television. The PDI-
P10LCD TV may be installed on other PDI-508C arms. Please refer to Appendix A
of this document for detailed instructions for this case.
3/4“ Socket Head
Cap Screw
Retainer Plate
Safety Brake
Pin Hole
Swivel Cap
