background image

PDI-P10LCD USER MANUAL 

Document Number PD196-058R3 

PDI Communication Systems, Inc. 

40 Greenwood Lane 

Springboro, Ohio 45066 

Phone 937-743-6010 

Fax 937-743-5664 

email: [email protected]

 

9

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Control Panel 
 

 
 
 
 
 
 
 
 
 
 
 
The easy to clean membrane control panel located on the lower front of the TV 
contains 9 large easy to read buttons and a numbered “direct entry” keypad for 
both channel and cursor control.  The 5 lower buttons are used to turn the TV ON 
or OFF, change channels and raise or lower the sound volume.   
 
If the speaker is currently programmed as “OFF” in the current service level (see 
the section following on “Power-On Channel and Speaker”), the message “Speaker 
Disabled” will be displayed if either volume button is pressed while no earphone is 
connected. 

In addition to the Channel Up and Down buttons, the numbered “direct entry” 
keypad may be used to directly enter the channel desired for viewing.  If the 
channel entered using this keypad is 

not 

programmed in to the current Service 

Level (see sections following on “Service Levels” and “Channel Setup”), the symbol 
“[X]” will be displayed in red in place of the channel number, and the channel will 
not change. 

The “2”, “4”,”6” and “8” buttons on the direct entry keypad are also used for cursor 
positioning on televisions used in computer control applications. 

The “feature” and “enter” buttons allow the patient to self rent the television. 
 
The “cc” button alternately activates and deactivates program closed captioning.  
Note:  Not all programs offer closed captions.  Pressing the button may not result in 
the display of any captions. 
 
The “mute” button will mute the TV audio.  The word “MUTE” will then appear on 
screen.   Pressing the button again or pressing the volume up or volume down 
buttons will enable the TV audio and remove the word “MUTE” from the screen. 
 

BUTTON FUNCTION SUMMARY 

POWER  

  Turns the TV ON or OFF. 

VOLUME 

  Increase or decrease the TV volume. 

CHANNEL 

  Changes the viewed channel up or down. 

ENTER 
MUTE 

  Used in computer-controlled applications. 

Mutes TV audio. 

CC 

  Activates or deactivates closed captions. 

FEATURE 

  Activates self rental or computer controlled 

system instructions. 

NUMBERS 

  Direct channel entry. 

 

 

POWER

DIRECT ENTRY 
KEYPAD 

Summary of Contents for PDI-P10LCD






















Reviews: