3 4
Safety Cont’d
…
IMPORTANT
To maintain accuracy of the meter, replace the exhausted battery
immediately when the battery symbol “ “ appears on the meter
display.
Avoid measuring error from outside interference. Keep the meter
away from spark plugs or coil wires.
Avoid damaging the meter when testing voltage. Disconnect the test
leads from the test points before changing functions.
Do not exceed the limits shown in the table below:
Function
Terminal
Input limit
DC/AC Volts,
Ohm/Continuity
/Diode,CAP.
Adaptor, Type-K
TEMP.,Hz,%Duty,
mS Dwell, RPM
V-
Ω
-RPM
600Volts AC/ DC
AC/DC
μ
A mA
μ
A / mA
400mA DC/AC
AC/DC20A
20A
*20A DC/AC
*20 Amp measurement for 30 seconds maximum.
Getting Started
This chapter will help you get started. It describes the basic functions of
the Meter.
Meter Basics
1. Digital LCD display
Display features:
1a. Symbols to identify function
1b. Four character digital display
The digital display is best for stable
input. The bar graph is best for rapidly
changing input.
2. Function buttons
Press the button to select a function. A
symbol will display to verify your
choice.
3. Rotary Function Dial
Turn this switch to select a function or
turn the meter OFF.
4. Volts Terminal
The Red test lead is used to measure Amps, Volts, Ohms, TEMP, Hz,
RPM, Cap, mS and Dwell.
The Black test lead is used in the Common (COM) terminal for all tests
and measurements.
¦ ¸
Auto Power Off
4
2
1a
1b
2
3
4
