25
INTEGRATION GUIDE
6.3.2. Antenna Information
This radio transmitter has been approved under RED 2014/53/EU to operate
the antenna types listed below with the maximum gain indicated. The usage of
different antennas in the final host device may need a new assessment of host
conformity to RED 2014/53/EU.
Table 3.
Approved Antennas
PCTEL Part Number
Description
Gain
5150 - 5850 MHz
BOA51004NM
Heavy-Duty Omnidirectional Antenna
4 dBi
MPAMB24495804-RPSMA
Portable Omnidirectional Antenna
4 dBi
MHODB24490507NM-IP
Dual-Band High-Performance Omnidirectional Antenna
7 dBi
AEMH51PT155UFL
Circuit-board-based 5 GHz horizontally ploraized monopole
with 155 mm U.FL pigtail cable
4.3 dBi
AED2451PT155UFL
Circuit-board-based dual-band dipole with 155 mm U.FL pigtail cable
2.8 dBi
AEMV2451PT155UFL
Bent metal dual -band monopole with 155mm U.FL pigtail cable
2.4 dBi
AEPV2451PT155UFL
Bent metal dual -band PIFA with 155mm U.FL pigtail cable
4.8 dBi
In addition, two antenna cables are required.
6.3.3. European Union and UK Radiation Exposure Statement
This radio transmitter has been evaluated for RF exposure for humans in reference
to ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits.
The evaluation was based on the EN 62479 in conjunction with IEEE C95.1. To
maintain compliance, the minimum separation distance from the antennas is 7.87
inches (20 cm) from end users and general bystanders.
6.3.4. EU and UK Compliance Statement
Any integrator must include specific information in the user-s guide for the
device into which the RM-WIFI-AC-2X2-HP-EU is integrated. In addition to FCC
and ISED statements outlined above, the following Radio Equipment Directive
(RED) statements must be added in their entirety and without modification into a
prominent place in the end-user’s documentation.
This device, RM-WIFI-AC-2X2-HP-EU complies with the essential requirements of
the 2014/53/EU - Radio Equipment Directive (RED). The following test methods
have been applied in order to prove presumption of conformity with the essential
requirements of the 2014/53/EU - Radio Equipment Directive (RED):
• EN 62368-1:2020 + A11:2020
Safety requirements for audio/video, information, and technology equipment
•
EN 62479:2010
RF Exposure
