15
INTEGRATION GUIDE
6.1. Manufacturer’s Federal Communication Commission (FCC) Compliance
Statements
Model:
RM-WIFI-AC-2X2-HP-US
FCC ID:
NYPRMWIFIAC2X2
Manufacturer:
PCTEL, Inc.
471 Brighton Dr.
Bloomingdale, IL 60108-3102
USA
To ensure regulatory compliance, when integrating the RM-WIFI-AC-2X2-HP-US
radio module into a host device, it is required to meet the documentation and
operational requirements set forth by the applicable regulatory agency. The
following sections outline the information that must be considered and included in
the user’s guide and external labels for the host device that includes the
RM-WIFI-AC-2X2-HP radio module.
6.1.1. Antenna Information
The RM-WIFI-AC-2X2-HP-US radio module has been designed and approved to
operate with the antennas listed below.
Table 3.
Approved Antennas
PCTEL Part Number
Description
Gain
5150 - 5850 MHz
BOA51004NM
Heavy-Duty Omnidirectional Antenna
4 dBi
MPAMB24495804-RPSMA
Portable Omnidirectional Antenna
4 dBi
MHODB24490507NM-IP
Dual-Band High-Performance Omnidirectional Antenna
7 dBi
AEMH51PT155UFL
Circuit-board-based 5 GHz horizontally ploraized monopole
with 155 mm U.FL pigtail cable
4.3 dBi
AED2451PT155UFL
Circuit-board-based dual-band dipole with 155 mm U.FL pigtail cable
2.8 dBi
AEMV2451PT155UFL
Bent metal dual -band monopole with 155mm U.FL pigtail cable
2.4 dBi
AEPV2451PT155UFL
Bent metal dual -band PIFA with 155mm U.FL pigtail cable
4.8 dBi
In addition, two antenna cables are required.
6. Compliance
Figure 6.
Compliance
Safety
IEC 62368-1
UL/CSA 62368-1
Radio Approvals
FCC Part 15.407
EN 301 893
RSS-210
RSS-247
EMI and Susceptibility
FCC Part 15.107, 15.109
EN 301 489-1, 301 489-17
ICES-003
