12
INTEGRATION GUIDE
This can be verified by looking at the boot log or issuing the dmesg command and
looking for lines that begin with
ath10k_pci
. The system needs to have the correct
board data file at that location to pull the correct configuration and initialization
information for the Radio Module to function.
Below is an example of the driver and the PCTEL board data file loading correctly.
root@OpenWrt:/# dmesg | grep ath10k
[ 15.869293] ath10k_pci 0000:05:00.0: enabling device (0140 -> 0142)
[ 15.876075] ath10k_pci 0000:05:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0
reset_mode 0
[ 18.503626] ath10k_pci 0000:05:00.0: qca9888 hw2.0 target 0x01000000 chip_id
0x00000000 sub 0000:0000
[ 18.512911] ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1
testmode 1
[ 18.530080] ath10k_pci 0000:05:00.0: firmware ver 10.4-3.9.0.2-00070 api 5
features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps crc32 a44e2231
[ 19.111055] ath10k_pci 0000:05:00.0: board_file api 1 bmi_id N/A crc32 74ac9ec2
[ 21.342454] ath10k_pci 0000:05:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta
512 raw 0 hwcrypto 1
