PCS PCS 4000, User Manual

Page: 4 / 20

4
USER GUIDE
PCS 4000
SINGLE WELL CONTROLLER
report and program FunCtion
reFerenCe
The tables in this section cross-reference the reports and
program functions described in this
User Guide.
Reports
Report READ Page
Software Version Report CE 6
Battery Status Report 00 6
Status of A-Valve when B-Valve Is Open B0 9
A-Valve and Plunger Counts History 04 5
B-Valve and Plunger Counts History B4 5
Plunger Travel Time History 06 5
A-Valve Total Time Report 07 5
B-Valve Total Time Report B7 5
Valve/Plunger Counts History, Total Time
Reports, and Plunger Travel Time History 10 5
Time Open and Closed History 19 6
Modbus Address Report 22 6
Clearing Report Values
Program Function SET Display Name Page
Clearing Report
Values 10 ZERO ALL TOTALS 6
Program Functions
READ 90 Program Function List
Press READ 90 to display the current times, pressures,
and flow rate values programmed for all functions listed in
the table on the right side of this page.
SET 90 Program Function List
Press SET 90 to program all functions listed in the table
on the right side of this page.
Additional Program Function
To program this function, press SET B 0.
To display its current value, press READ B 0.
Program Function SET or
READ
Display Name
Page
Status of A-Valve
when B-Valve Is Open B0 A OPEN W/ B VAL. 9
Program Function SET or
READ
Display Name
Page
OPEN TIME ON A OPEN TIME 9
CLOSE TIME OFF CLOSE TIME 11
DELAY TIME (SALES) 02 A DELAY TIME 13
MANDATORY
SHUT-IN TIME 03 MAND. SHUT-IN 10
B OPEN TIME B ON B OPEN TIME 9
B DELAY TIME B2 B DELAY TIME 13
FALL TIME 05 FALL TIME 9
DELAY CLOSE TIME 08 DELAY CLOSE TIME 10
Sensor Operation 09 SENSOR?
SET SENSOR 9
A-Valve Location
(local or remote) 60 VALVE A LOCATION none
B-Valve Location
(local or remote) 61 VALVE B LOCATION none
C-Valve Location
(local or remote) 62 VALVE C LOCATION none
Operating Mode 11 1. TIME 2. T-L
3. C-T 4. C-L 9
DIFFERENTIAL
OPEN PRESSURE 12 OPEN PRESSURE 9
DIFFERENTIAL
CLOSE PRESSURE
(DIP) 13 CLOSE PRESSURE 10
HIGH LINE CLOSE
PRESSURE 14 HIGH LINE PRES. 13
DELAY LINE CLOSE
TIME B8 LINE DELAY TIME 13
LOW LINE CLOSE
PRESSURE 15 LOW LINE PRES. 13
CASING DROP
PRESSURE 20 CASING DROP PRS. 12
CASING PEAK TIME 21 CASING TIME 11
LOW FLOW RATE 23 MIN. FLOW RATE 12
LOAD FACTOR 24 LOAD FACTOR 11
CRITICAL FLOW K
FACTOR 25 TURNER CRIT
FLOW CONSTANT 12
EFM Device Setup 31 READ REMOTE
FLOW
READ ACCUM
FLOW
SELECT EFM TYPE 9
Flow Rate Unit of
Measurement 33 METRIC 3
B LOW FLOW RATE 35 B LOW FLOW RATE 12
B LOW FLOW
DELAY TIME 36 B LOW FLOW
DELAY 12