Brought to you by PCS Electronics, www.pcs-electronics.com
Testing the connection
The easiest way to test the connection is to try to send data to the processor. If there is an error message you’ll know
something is wrong. Also, when you change PS the station name on receiver will be changed.
FM TX main tab – transmitter setup
FM transmitter setup
Not needed when used to control stereo processor
FM transmitter type
Not needed when used to control stereo processor
FM transmitter frequency
Not needed when used to control stereo processor
Transmitter output power
Not needed when used to control stereo processor
Stereo/Mono
Not needed when used to control stereo processor, change via LCD display.
Audio input level
Not needed when used to control stereo processor, change via LCD display.
Bass and Treble
Not needed when used to control stereo processor, change via LCD display.
Audio Compressor Settings (only with DSP stereo encoders)
Not needed when used to control stereo processor, change via LCD display.
FM TX alarms