Brought to you by PCS Electronics, www.pcs-electronics.com
Cyber LCD control module
Basically there are three push-buttons available for the menu system;
UP
,
DOWN
and
MENU
. By pushing
UP
or
DOWN
you change the selected parameter in corresponding direction. The third button (
MENU)
gives you an option to
select and setup many of the options and DSP functions of this unit. LCD display with rotary encoder has a different setup,
you need to press the rotary button to select menu. Rotating up or down changes the paremeter value.
Lcd control module menu system: Power and DSP functions
The UP and DOWN keys are used to change parameter values. In normal mode the LCD simply shows audio level for
both channels. Menu key can be used to enter the menu mode, repeatedly pressing this key brings up the following menus:
<STEREO MODE>, <TREBLE>, <BASS>, <COMPRESSION>, <THRESHOLD>, <ATTACK>, <DECAY>,
<INTEGRATION>, <LCD CONTRAST>, <RIGHT CH VOL>, <LEFT CH VOL>, <PILOT LEVEL>, ,
<PREEMPHASIS>, <FIRMWARE VER>. Pressing the UP or DOWN key selects the desired parameter and allows you
to modify its value. Another press on the MENU key and you’re back to the normal mode. Note that all these settings
except power and frequency are already set as they should be so changing them should not be necessary and is not
recommended. Best values are marked with D, such as <50uS D>.
<STEREO MODE>
You can set your transmitter to MONO or STEREO here.
<TREBLE> and <BASS>
This option allows you to set the amount of TREBLE and BASS in your audio. Recommended values are marked with (D).
Setting treble
Setting bass
Chapter
4