Brought to you by PCS Electronics, www.pcs-electronics.com
Compressor Settings (only with DSP stereo encoders)
A number of MENU settings control the operation of the compressor. Lets assume that the audio signal enters the
transmitter at some low level. Compressor does nothing to the signal until at one point as the input signal increases the
signal reaches the compression threshold. Digital signal processor starts compressing the signal beyond that point. The
higher the compression ratio the higher the compression. For example, compression ratio of 1:
∞
would in effect be a
limiter.
Explanation of the compressor settings
Setting the compression level
Setting the compression threshold
Setting the attack time, this is the time between the input signal and the actual response of the compressor