Brought to you by PCS Electronics, www.pcs-electronics.com
as, than select Properties. Now select the Port settings tab and click Advanced. Note you can set the COM port number as
you wish:
Configuring Com port for USB driver
Installing correct program for controlling your FM transmitter
We are going to use a program that normally serves to control the FM transmitter, but when used for stereo processor the
only thing that will work is the RDS encoder section. Everything else (DSP stereo parameters) will need to be set via LCD
display. Download the
CyberMaxFM V6.4 setup program
from the page
mentioned earlier
(or newer version, if
available). We also know which COM port it is from previous step.
Software installation
Download the latest setup file from the links above. Once you have the setup file run it and install the program on your
computer. This process is very straight-forward and should only take a few minutes. Wait for the installation to complete
and click Finish when done.
Welcome screen (from previous version of software)
Once the installation is done you are ready to start the program. But before you do please establish physical connection
between the transmitter and the PC.
Always connect and power up the processor BEFORE you start the Windows
control program! Failing to do this can cause the program to freeze (you will have to close it and start it up
again). Also, close the Windows control program before powering off the transmitter.