PCS Digital PCS Digital Suite 64, User Manual

Page: 42 / 116

2-32
Suite 64 31-Button Telephone User Guide
Te
le
ph
on
e
Set
u
p
2
c. To program a feature code, press
pgm
.
d. Press the
f
button.
e. Enter the feature code for example, enter
#4
for DND and then press
save
.
5. Continue programming other Feature/DSS Buttons or lift/replace the
handset to exit this programming.
Operational Notes
• If you dial an invalid code you will hear error tone and the 31 ‐ Button Tele ‐
phone display will show “
CODE UNAVAILABLE
.”
• In some cases a user can program a Feature/DSS Button for a specific CO line
although access is restricted to that line via database programming. In this
situation, the telephone is still governed by database programming and
would still be unable to access the CO line if restricted.
• Valid feature codes must be in the form of either “Pn” or “Pnn” where “P” is
the Feature/DSS Button and “n” is either a single ‐ digit or two ‐ digit code,
including asterisk (*) and pound (#) dialed from the dial pad.
• Any Feature/DSS Button programmed with a code previously assigned to a
different Feature/DSS Button will cause the previously programmed Fea ‐
ture/DSS Button to become unassigned.
• Feature/DSS Buttons can be cleared of any feature code/directory number by
pressing
save
before entering a code/number.
PGM CODE:_
bksp save chg