Address:East Room 306,3th Floor,1st Building,Shenhua Industrial Park,Meihua Road, Futian District,Shenzhen City
Tel:0755-32978297
Email:[email protected]
Figure 25: Display of saved measurements
Press ▼▲ to scroll to the next measurand. The currently displayed measurands can be deleted by pressing F1.
Press F3 to exit the menu. The PCE-VM 25 memory can hold 16000 measurement values.
6.7. Deleting Saved Measurement Data
In the menu option “Measurement data” / “Erase meas. data Memory” you can delete the entire measurement data. After pressing OK a warning message will appear
showing the total number of records.
6.8. K(t) Measurement
The basics of rolling bearing parameters K(t) can be found in section 3.5
First, use keys ◄► to select the operation mode “Roll. bearing” (Figure 26).
Figure 26: PCE-VM 25 in K(t) mode without VMID
K(t) measurements are only intended for use in conjunction with a VMID measurement point. The start / reference values RMS and peak of values which have been measured on
the new rolling bearings are required for calculating K(t). These start values are saved in the PCE-VM 25 together with the measuring point ID. Place the sensor on a VMID
measuring point of the relevant bearing. If the VMID measurement point ID has not yet been saved in the
PCE-VM 25 (Figure 27), then first of all enter the ID name by pressing the ▼ key (cf. Section 6.3.2).
EN - 18
