4
2.6 Setup the parameters
You can setup the emissivity, max/min display, high/low alarm, temperature unit,
temperature offset as follows:
Release the trigger to enter to the Hold mode. Each time you press the mode
button will enter to another function interface. The currently selected mode will show
on the display by indicator flashes.
Now, you can choose or modify the requested value by pressing the up and down
buttons. Press mode button to save the value and enter to next function. If you have
not activated any button for 7 seconds, the unit will not save the current modification
value and switches down automatically.
After enter the selecting mode, the following flashing signals will show on the
display in turn.
2.7 Setup
emissivity
In
HOLD
mode, press the mode button (
○
) to set the emissivity.
1)
Emissivity(
E
= )
flashing
2)
Press up button ( ) to increase the emissivity
∧
3)
Press down button (
∨
) to reduce the emissivity
