3
2. Operation
2.1 Starting the measurement
Turn on
: Press the trigger to turn on the unit.
Measuring
: Aim the thermometer at a target. Pull the trigger and keep it pressed.
The display will show the current temperature value.
2.2 Hold-Function
If you release the trigger, the unit will enter to
HOLD
mode. The display shows
HOLD.
2.3 Switch
off
The unit automatically switches off after 7 seconds if no button is pressed..
2.4 Setup the laser
Pull the trigger(keep it pressed) and then press up button ( )
∧
to activate or
deactivate the laser. The laser symbol in the display(only if the trigger is pulled)
indicates the active laser.
2.5 Setup the display backlight
Pull the Trigger(keep it pressed) and then press the down button to
activate/deactivate the display backlight. The symbol in the display will indicate that.
WARNING: Do not point the laser
directly at the eyes of persons or
animals! Do not stare into the laser
beam. Avoid indirect exposure via
reflective surfaces.
