EN - 21
USB
MD8
The force gauge has two external ports: a USB port and an MD8 port.
6.1
USB port
The USB port is used to transmit data to a PC, as well as for recharging. Connect the USB cable to the charger
for recharging.
6.2
Multifunctional port
The MD8 port is a multifunctional port which includes an RS232 interface to connect to a printer or computer, as
well as two alarm outputs.
You can change the baud rate in the menus.
Alarm output:
There are two alarm outputs. You can connect them to other equipment (such as a test stand, PLC, etc.) or to some
alarm units.
! Maximum permissible voltage
Pin 7 - pin 6, pin 4 - pin 6: 35 V
Pin 6 - pin 7, pin 6 - pin 4: 6 V
E
n
g
lis
h
RS232 specifications
Data word length
8 bits
Stop bit
1 bit
Parity
none
Baud rate
9600,19200, 38400
Hardware flow control
none
Summary of Contents for PCE-DFG 500
Page 13: ...IT 13 Italiano...
Page 23: ...EN 23 English...
Page 24: ...Specifications are subject to change without notice...
