© PCE Instruments
4
General technical specifications of the clamp meter PCE-DC 50
Maximum cable diameter
max. 48 mm
Display
two-line, 50,000 digits
Continuity test
50 ohms
<50 mA
Diode test
0.3 mA
2.8 V DC
Battery indicator
battery icon when battery level is low
Overrange
OL when measurement range exceeded
Sampling rate
2 Hz
Peak detection
>1 ms
Thermocouple
Type K
Fuse
500 mA ceramic, fast-acting
AC bandwidth (AC A / AC V)
50 Hz ... 400 Hz
AC measurement
True RMS
Operating conditions
5 °C ... 40 °C / 41 ... 104°F
max. 80 % RH at 31 °C
Storage conditions
-20 °C ... 60 °C / -4 ... 140°F
max. 80 % RH
Power supply
9 V block battery
Automatic power off
after approx. 30 minutes
Interface
Bluetooth
Dimensions (W x H x D)
230 x 76 x 40 mm / 9 x 3 x 1.6
“
Weight
315 g
Safety
IEC 1010-1(2001): EN 61010-1(2001)
CAT III 600 V
CAT II 1000 V
Pollution degree 2
3
Delivery scope
1 x PCE-DC 50 clamp meter, 1 x test lead set, 1 x carrying case, 1 x PC software, 1 x
Bluetooth adaptor, 2 x K-type thermocouple, 1 x 9 V block battery
