© PCE Instruments
7
8
Charging the battery
If the battery voltage is low, the light next to "UnderVoltage" on the left of the display glows.
Connect the mains adaptor and charge the battery. The connector is located at the bottom of the
housing, in the recess in front of the front right foot of the balance. During charging, the light next
to "InCharge" to the left of the display glows.
9
Troubleshooting
Problem
Possible cause
Solution
No display
Low or no voltage
> Recharge batteries in time
> Check whether charging via
the mains adaptor works
Weight display
not stable
- Influence by the environment
(vibration,
temperature fluctuations),
- Objects between weighing plate
and housing
- The weighing material is not stable
> Keep the environmental
conditions as stable as
possible
> Remove objects
> Fix the weighing product
Weighing is not
correct
- No calibration
- No taring before weighing net
weights
- Readability, decimal places, unit
set incorrectly
- With very small values, the display
remains 0 if the "E-0" value is too
high or automatic zero tracking has
been activated
> Calibrate and -if necessary-
adjust
> Tare before weighing
> Check the set values
> For small quantities, make
sure that E-01 and t0-OFF
have not been changed
"CE-Err"
Scale displays
"CE-Err" when switched on
> Reconnect the mains adaptor
to charge the battery
"-Err-"
- Quick calibration with wrong weight
- Upper limit value outside the
weighing range of the balance
> Use suitable calibration
weight
>Adjust limit value
„- - - - - -“
Weight of the item to be weighed
exceeds the weighing range.
Only load up to the specified
max. weight
