USER MANUAL
____________________________________________________________________________________________________________________
23
22.
Maintenance and repairs of small defects
1.
The balance should be kept clean.
2.
Take care that no dirt gets between a casing and the pan. If found any, remove
the pan (lift it up), remove dirt and then replace the pan.
3.
In case of improper operation caused by short-lasting power supply decay,
unplug the balance from the mains and then plug it again after few seconds.
4.
To calibrate the balance contact nearest service.
5.
It is forbidden to make any repairs by unauthorised persons.
6.
To repair the balance, please contact our nearest service.
Error communicates:
Communicate Possible
cause
Remedy
C-1 ... 6
(over 1 min.)
selftests failed
if displayed more than
1 minute, contact an authorised
service
L
pan missing
put the pan on
mechanical damage
contact an authorised service
H
overloading
remove the load from the pan
mechanical damage
contact an authorised service
indicator does
not appear
unstable ground
vibrations
air flows
place the balance on a stable
ground not affected by
mechanical vibrations and
airflows
balance damage
contact an authorised service
-
-
-
-
-
-
taring in progress
as above
