USER
MANUAL
____________________________________________________________________________________________________________________
20
19.
Pieces counting (PCS)
This function enables to count
identical pieces, e.g. turnbuckles or
buttons.
A measurement is performed in two
phases:
- first phase - single piece weight
calculation on the basis of defined
pieces amount (5, 10, 20, 50, 100,
200 or 500 pieces),
- second phase – pieces counting.
It is advised that single piece
weight is not less than one reading
unit and sample weight used in
first phase is bigger than 100
reading units.
To leave function press
MENU
key
and then with
→
T
←
key chose
"PCS" and "OFF".
Note:
Err-PCS communicate signalises that
a sample was not put on the pan. The
same communicate appears if single
piece weight is less than one reading
unit (it is possible to count pieces but
measuring error is bigger).
To chose previously used pieces
amount select “..” in first phase.
During pieces counting T key
function does not change.
0 pcs
5 pcs
0.0000 g
0.1204 g
PCS
SAMPLE
5 pcs
5
12
12 pc s
MENU
T
T
T
T
