Manual
15
any key to save and return to the Measure screen. The symbol
will display on the instrument screen
after Upper/Lower limit alarm is enabled.
7.11 Memory
Press ▼ to enter the Menu screen. Press ▼ or ▲ to select Memory and press ► to enter. Press ▼ or ▲
again to select in cycle: X(Off) → MODE1(Save single)→ MODE2(Save Mean) → MODE3(Manual Save)
→ View → Erase → File.
X (Off): Do not save the measurement. Press ► to confirm and return to the Menu screen.
7.11.1 MODE1 (Save single)
Save each measurement. Press ► to confirm and return to the Menu screen.
7.11.2 MODE2 (Save Mean)
Only save the mean value. Press ► to confirm and return to the Menu screen.
7.11.3 MODE3 (Manual Save)
Save the data by pressing ► after measuring. Press ► to confirm and return to the Menu screen.
7.11.4 View
To view the stored data. Press ▼ or ▲ for Page/Up/Down. Press ► to return to the upper-level menu.
7.11.5 Erase
Clear all data of current file. For example, as file A0 is displayed, all data of file A0 will be deleted. Press
► to display “Erase All”. Press ► to confirm and delete the data. Press ▼ or ▲ to cancel.
7.11.6 File
Press ► to enter the File menu. Press ▼ or ▲ to select the file. Press ► to confirm and return to the
upper-level menu.
After setting, press ► to confirm and return to the upper-level menu, or press and hold any key to save
and return to the Measure screen.
