Working with control panel
20/29
urement and press
button on the
screen. Calibration screen
will appear (fig. 22).
fig 22. Calibration
Press
and after the calibration the screen should show “–
Moisture
0.0
%
” (fig. 23). Calibration is finished and the sensor is ready for measurements.
fig 23. “Settings” screen after the calibration
To access service functions menu (fig. 24) press
button.
The left area of the screen displays the table of target moisture levels for drying
process for each product. The signal is sent to operator when the target value of
moisture content for selected product is achieved. Moisture content control mode can
be enabled for each sensor individually by pressing
button.
For example, the target moisture content for corn is set at 15% (fig. 24). Sound
alarm will be triggered when measured moisture content will become lower than the
