Working with control panel
14/29
the sensors at a particular moment of time click on a trend section corresponding to
this moment and read the value in the "
Watch line
" line at the bottom of the screen
(fig. 12).
The scale of vertical axis can be changed. To change the upper limit press on
the limit value and enter a new value using numeric keypad. The limit can be
changed in increments of 5% (fig. 13). Press
button on the numeric keypad to
complete the operation. Similarly you can change the lower limit value of the trend in
increments of 5% by pressing the lower limit of vertical axis.
fig 13. Changing vertical axis limits
“Trends” mode can be accessed from
mode (fig. 4). Press the figure
of instantaneous value of moisture content or temperature for chosen sensor to
switch to “trends” mode.
