Working with control panel
10/29
4.2. Selecting product and performing moisture measurements
The work with moisture content sensors starts with product selection. Press
to open product selection menu (fig. 5).
fig 5. Product selection menu
Select the product and confirm selection by pressing
. Now moisture
sensors are ready to work with the selected product. Select
mode and fill
the measurement channels of the sensors with grain. Green indicators will turn white
and measured value of moisture content for each sensor will be shown on the dis-
play (fig. 6).
fig 6. Instantaneous and averaged moisture values
Small numbers in the bottom-left and bottom-right corners of the display repre-
sent instantaneous measured values for each sensor. Large numbers in the center of
the display show moisture contents values averaged over time (see section 4.4 for
averaging settings).
