Onboard Serial Port 2
Default: Disable
This item lets you disable the built-in serial port 2, or enable it by assigning an
I/O address and an Interrupt Request Line (IRQ).
UART Mode Select
Default: IrDA
UR2 Duplex Mode
DefaultL Half
This item defines the operation of serial port 2. In the Normal setting, serial port 2
is assigned to the external COM2 connector. If you have installed an optional
infrared port, you must change the setting of this item to one of the Infrared
settings (usually IrDA or FIR). These settings will disable the external COM2
serial port connector and assign the resources to the infrared device. If you have
selected an IR mode, use the following item
UR2 Duplex Mode
to define if the IR
port is full duplex or half duplex.
Onboard Parallel Port Default:
378/IRQ7
This item lets you disable the built-in parallel port, or enable it by assigning an
I/O address and an Interrupt Request Line (IRQ).
Parallel Port Mode
Default: SPP
ECP Mode Use DMA
Default: 3
This item defines the operation of the parallel port. As a default it is set to SPP
(standard parallel port). If you are connected to a parallel device that supports
the higher-performance EPP (enhanced parallel port) or the ECP (extended
capabilities port) make the appropriate changes to this item. If you have changed
the parallel port to ECP mode, use the following item
ECP Mode Use DMA
to
assign a DMA channel to the port.
PWRON After PWR-Fail
Default: Off
If this item is enabled, the system will automatically resume when power is
restored after an interruption in the power supply.
Game Port Address
Default: 201
This item lets you disable the built-in game port, or enable it by assigning an I/O
address.
Midi Port Address
Default:330
Midi Port IRQ
Default: 10
This item lets you disable the built-in MIDI port, or enable it by assigning an I/O
address. If you enable the MIDI port, use the following item
Midi Port IRQ
to
assign an Interrupt Request line to the port.
49
