Before You Begin
Before you begin to install your KOB 810e FSFx mainboard, take some
precautions to ensure that you avoid the possibility of damage to the
product from static electricity. Ensure too that you are installing the
mainboard into a suitable case.
Static Electricity
In adverse conditions, static electricity can accumulate and discharge
through the integrated circuits and silicon chips on this product. These
circuits and chips are sensitive and can be permanently damaged by
static discharge.
♦
If possible wear a grounding wrist strap clipped to a safely
grounded device during the installation.
♦
If you don’t have a wrist strap, discharge any static by touching
the metal case of a safely grounded device before beginning the
installation.
♦
Leave all components inside their static-proof bags until they are
required for the installation procedure.
♦
Handle all circuit boards and electronic components carefully.
Hold boards by the edges only. Do not flex or stress circuit
boards.
Choosing a Case
The mainboard complies with the specifications for the FlexATX system
case, although it can also be installed in most micor-ATX case designs.
The FlexATX specifications include a maximum size of 9.0” x 7.5”
(229mm x 191mm), a reduced number of expansion slots, and support
for a smaller power supply unit.
Some features on the mainboard are implemented by cabling connectors
on the mainboard to indicators and switches on the system case. Ensure
that your case supports all the features required. The KOB 810e FSFx
mainboard can support one or two floppy diskette drives and four
enhanced IDE drives. Ensure that your case has sufficient power and
space for all the drives that you intend to install.
10
