PCB Piezotronics 441A101, Installation And Operating Manual

Page: 37 / 94

443B101/443B102 17
Manual 19854 Rev. D
ECN 50523
Command: LOWF
Purpose: Sets the low frequency response of the amplifier.
Response:
The module responds with a “0” to tell the calling process the command has
been received.
Command String: XYC0ZLOWFZ
Description: X — Rack number of the target module (Range: ASCII printable characters, 0
through 3)
Y
— Slot number of the target module. (Range: ASCII printable characters, 0
through 7)
C0Z — Module type for the target. Specifying "C01" in this argument addresses
a 443B101, specifying “C02” addresses a 443B102.
LOWF
— Commands module to change the low frequency response.
Z
— specifies the low frequency response as follows:
“1” sets the low frequency response to 0.2 Hz.
“2” sets the low frequency response to 2.0 Hz
“3” engages the medium time constant.
“4” engages the l ong time constant.
Response String: “0”
Description:
This return indicates that the command was received by the card.
Example:
Command String: “06C02LOWF3”
Response String: “0”
The 443B102 in rack 0 and slot 6 is set to medium time constant mode.