443B101/443B102
15
Manual 19854 Rev. D
ECN 50523
Command: ICPM
Purpose:
Puts the amplifier into ICP mode and sets the constant current.
Response:
T
he module responds with a “0” to tell the calling process the command has
been received.
Command String:
XYC0ZICPMZZ
Description:
X
—
Rack number of the target module (Range: ASCII printable characters, 0
through 3)
Y
—
Slot number of the target module. (Range: ASCII printable characters, 0
through 7)
C0Z
—
Module type for the target. Specifying "C01" in this argument addresses
a 443B101, specifying “C02” addresses a 443B102.
ICPM
—
Commands module to charge mode.
ZZ
—
specifies the constant current as follows:
“00” turns the constant current off (voltage mode).
“02” sets the constant current to 2 mA.
“04” sets the constant current to 4 mA.
“08” sets the constant current to 8 mA.
“12” sets the constant current to 12 mA.
“20” sets the constant curre
nt to 20 mA.
Response String:
“0”
Description:
This return indicates that the command was received by the card.
Example:
Command String:
“06C02ICPM08”
Response String:
“0”
The 443B102 in rack 0 and slot 6 is set to ICP mode and the constant current is
8 mA.
Summary of Contents for 441A101
